Epoxy Coatings

General Purpose High performance Epoxy Resin Used for: Altex Epoxy Resin may be mixed with either Altex Microballoons, or General Purpose Thickener to provide site mix fairing, gap filling glue and coving compounds.   Easy mixing  -  4 : 1 ratio by volume Excellent cure characteristics with a good “tail” read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

A solvent-free, epoxy resin specifically formulated for use as a primer on porous concrete. Can be used as for coving and patching when used in conjunction with select Altex Ancillary products – Contact Technical Services for further information. read more »

Availability: - New Zealand

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Altra~Bond 3094® is a two component, Strontium Chromate based epoxy primer designed for use on aluminium structures, sheets and extrusions and galvanised substrates. It has Excellent adhesion and anti- corrosive properties Fast dry to recoat Compatibility with high performance epoxy and urethane systems Altra~Bond 3094® is ideal as A primer read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

A three component, solvent free high strength multi-purpose epoxy mortar. Commonly used as a subfloor for resinous toppings where a high strength thin section screed is required. Can be laid to falls and feathered down to a minimum thickness of 1mm, maximum thickness of 50mm (in one application) read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet 

A high-performance, multi-purpose flooring epoxy coating that is easy to apply. It’s ideal for use in many flooring environments such as workshops, warehouses, factories, washrooms etc. Available in a variety of standard colours. • Self-priming on suitably prepared concrete, or over suitably primed surfaces • Low odour • Low viscosity read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

A solvent-free, epoxy resin specifically formulated for use as a primer on porous concrete under Altra~Floor EF. Can be used as for coving when used in conjunction with select Altex Ancillary products – Contact Technical Services for further information. read more »

Availability: - New Zealand

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Altra~Lock 576 is designed for use as a surface sealer, conditioner, and strengthener for porous substrates. It is especially useful in penetrating and saturating corroded surfaces where crevice corrosion cannot be treated by convention preparation methods. Maybe overcoated with a wide range of build and/or finish coats.   Altra~Lock 576 is a read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Made to Order or imported lines subject to availability. Altra~Shield ® WB-V is a two pack low VOC waterborne epoxy. The cured film presents a non-yellowing finish with high surface hardness and excellent flexibility. It exhibits excellent adhesion and water resistance, and is tolerant of application over damp surfaces.  Self-priming read more »

Availability: - New Zealand

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Penetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats. Some recommended uses of 1340 include the use as a curing compound or form release agent. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Proprietary cross-linking epoxy-acrylic gloss finish Fast cure iso-cyanate-free epoxy-acrylic gloss coating for industrial and marine and off-shore applications where use of polyurethane coatings is banned or undesirable. Isocyanate free Early through-curing Excellent colour and gloss retention with good chalking resistance Lead and chrome-free colour range Good chemical resistance Excellent durability read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard® 504 is an inert non-inhibitive anti-corrosive modified polyamide cured epoxy primer. Excellent primer for water and many aqueous chemicals immersion service when top-coated with an approved finish Excellent adhesion to difficult substrates Excellent holding primer Excellent corrosion resistance Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Availability: Australia Carboguard® 504 ZP is a zinc phosphate modified inhibitive anti-corrosive polyamide cured epoxy primer Carboguard® 504 ZP may be applied over suitably prepared mild steel, non-ferrous metals and other substrates as specified Excellent adhesion Excellent holding primer Excellent corrosion resistance Complies with AS/NZS 3750.13 (2 pack epoxy primer), read more »

Availability: - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

An all purpose epoxy coating that has a variety of attributes including low temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Carboguard 635 can be used direct to metal as a corrosion resistant primer or as an intermediate coating over primers. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

A rapid cure to topcoat epoxy with high abrasion resistance along with other valuable attributes including: low-temperature cure surface tolerance fast recoat times moisture tolerance during application and cure excellent corrosion protection. Carboguard 635 HAR can be used direct to metal as a corrosion resistant primer or as an intermediate read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Made to Order - High performance immersion grade epoxy that is designed as a liner for potable water tanks. This coating exhibits moisture tolerance during application, low temperature cure capability, and fast cure response for quick return to service. Product is self-priming on steel and is normally applied in two read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

A multi-purpose, advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility. Link   read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

A glass-flake filled, multi-purpose,advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility. Glass flake reinforcement enhances film strength, read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet 

Made to Order or imported lines subject to availability. Carboguard® 640 is a high performance, two-component, modified phenalkamine, chemically cured, immersion grade epoxy barrier coating Carboguard® 640 is an ideal high build coating for any service or structure, marine or industrial, where water or corrosion resistance is required. Carboguard® 640 read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Made to Order or imported lines subject to availability.  Suitable for single coat applications in areas such as a penstock lining at film thicknesses ranging between 400 and 1500 microns. Suitable for service in various immersion environments including industrial wastewater, slurry tanks, sea or fresh water, on buried structures, and read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

This high performance epoxy coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. This makes Carbomastic 615 eminently suitable for maintenance repaint work in marginal conditions and where surface preparation is less than ideal. It contains read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboxane 2000 is a premium, ultra-durable coating that provides outstanding gloss and colour retention for exterior exposures. Carboxane 2000 combines the chemical resistant properties of epoxies and polysiloxanes with the weathering characteristics of premium acrylic-polyurethanes. This tightly cross-linked film results in a finish with outstanding barrier properties and weathering performance. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Two component Epoxy. Corrosion and water resistant high performance, chemically cured, sandable epoxy coating, It can be used as a tie-coat over suitable prepared, aged epoxies and polyurethanes, or can be applied as a high build sandable epoxy to remove minor defects from the surface to be coated. Suitable for read more »

Availability: - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Rustbond PS is a very low VOC epoxy primer/sealer that combines outstanding surface tolerance characteristics over marginally prepared substrates and user-friendly features. It accepts a variety of topcoats and can help save time and money by minimising surface preparation requirements for new construction, maintenance and overcoating projects. Rustbond PS has read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet